ANALIZOR AUTOMAT BIOCHIMIE SI IMUNOTURBIDIMETRIE

690 teste / ora – productie: DIALAB, Austria

Caracteristici generale

• Viteza de lucru: 690 teste /ora cu modul ISE; 450 teste /ora fara modul ISE;
• Modulul ISE (Na, K, Cl, Li) este optional – analizorul este disponibil in varianta fara modul ISE sau in varianta cu modul ISE;
• Mod de operare: Secvential;
• Moduri de lucru: Rutina, Batch, Urgenta (STAT), Profile;
• Memorie pentru pana la 500 teste;
• Probele: ser, urina, plasma, LCR;
• Predilutie pentru probe;
• Predilutie pentru calibratori;
• Rotor reactivi – cu racire;
• Rotor calibratori si controale – cu racire;
• Statie de spalare pentru cuvele de reactie;
• Fotometru cu 13 canale (340 – 800 nm) – „solid state photometer”;
• Dilutor din ceramica cu durata de functionare indelungata – „Long life ceramic dilutor”;
• Senzor de cheag;
• Senzor de impact;
• Program pentru Controlul Calitatii – QC;
• Arhiva pacienti;
• Operare prin intermediul unui computer extern (se livreaza impreuna cu analizorul);
• Cuve de reactie din sticla optica speciala cu durata de functionare indelungata (nu se inlocuiesc, nu sunt consumabile);
• Cititor de coduri de bare intern pentru identificare probe si reactivi;
• Sistem de comunicare bidirectional LIS – pentru conectare la software de laborator;
• Rezervoare pentru apa de spalare si apa reziduala;
• Se pot folosi reactivi Dialab standard (impachetare standard) sau reactivi Dialab tip „System Packs” (impachetare speciala pentru analizor).

Metode

• „End Point” (cu sau fara blank de proba sau reactivi);
• „Fixed time”;
• Cinetice;
• Citire simpla.

Tipuri de calibrare

• Cu factor Best fit
• Liniar In puncte (Multipoint)
• Curba de calibare Log-logit 4
• Cubic spline Log-logit 5
• Polinomial Semi-log

Reactivi / Probe / Calibratori si Controale / Cuve de reactie

• Rotor reactivi: 80 pozitii cu racire;
• Rotor probe: 100 pozitii;
• Rotor calibratori si controale: 26 pozitii cu racire;
• Rotor cuve de reactie: 84 cuve de sticla optica speciala, cu sistem de incalzire;
• Volum de proba: 1.5 μL – 100 μL;
• Volum de reactie: 180 μL – 400 μL;
• Temperaturi la care se poate face termostatarea cuvelor de reactie: OFF/ 30°C/ 32°C/ 37°C +/- 0.2°C (controlat de sistem Peltier).

Fotometrul

• Fotometru („Solid state photometer”) cu 13 canale + 1 canal de referinta;
• Lungimi de unda: 340, 380, 405, 436, 480, 510, 546, 578, 600, 660, 700, 740, 800 nm;
• Intervalul de absorbanta: 0.000 – 3.000 Abs;
• Senzitivitate: +/- 0.001 Abs;
• Acuratete: +/- 1% de la 0 pana la 2.000 OD;
• Lampa halogen Tungsten cu reflector;
• Durata de viata pentru lampa – aproximativ 2000 ore.

Brate de pipetare / Dilutor

• 1 x brat de pipetare pentru probe;
• 2 x brate de pipetare pentru reactivi;
• 3 x dilutoare ceramice cu durata de functionare indelungata („Long life ceramic”);
• Precizia dilutoarelor: +/- 0.1%;
• Rezolutia dilutoarelor: +/- 0.1μL pentru probe ser ; +/- 1.0 μL pentru reactivi.

Consum de apa

• 9.5 ml /test

Interfata

• Port USB;
• Port RS232;
• Port LAN.

Cerinte electrice, Dimensiuni si Greutate

• 100 / 240 VAC, 50 – 60 Hz, 400 Watt;
• U.P.S.: 1500 Watt;
• Greutate neta: 162 kg;
• Greutate bruta: 237 kg;
• Dimensiuni: 1150 x 1150 x 720 mm.

Marcajul de conformitate CE; Standarde de calitate: EN ISO 9001, EN ISO 13485.

Analizorul poate fi achizitionat in varianta fara modul ISE sau in varianta cu modul ISE.

Analizorul se livreaza insotit de computer extern si imprimanta.

Termen de garantie: 2 ani de la data punerii in functiune.

General characteristics

Working speed: 690 tests / hour with ISE mode; 450 tests / hour without ISE module;
The ISE module (Na, K, Cl, Li) is optional – the analyzer is available in ISE mode or ISE mode;
Operating mode: Sequential;
Working Modes: Routine, Batch, Emergency (STAT), Profiles;
Memory for up to 500 tests;
Samples: serum, urine, plasma, CSF;
Pre-dilution for samples;
Pre-calibration pre-dilution;
Reactive Rotor – Cooling;
Rotor calibrators and controls – with cooling;
Washing station for reaction vessels;
13-channel (340-800 nm) photometer – „solid state photometer”;
Durable ceramic dilator – „Long life ceramic dilutor”;
Clot sensor;
Impact sensor;
Quality Control Program – QC;
Patient archive;
Operation via an external computer (delivered with the analyzer);
Special glass optic reaction tubes with long service life (not replaceable, non-consumable);
Internal barcode reader for identification of samples and reagents;
LIS bidirectional communication system – for connection to laboratory software;
Tanks for washing water and waste water;
Standard Dialab Reagents (standard packaging) or Dialab Type „System Packs” Reagents can be used.
Methods

„End Point” (with or without sample blank or reagents);
„Fixed time”;
kinetic;
Easy reading.
Types of calibration

With Best fit factor
Linear In Points (Multipoint)
Log-logit calibration curve 4
Cubic spline log-log 5
Polinomial Semi-log
Reagents / Samples / Calibrators and Controls / Reaction Covers

Reactive Rotor: 80 Cooling Positions;
Rotor sample: 100 positions;
Rotor calibrators and controls: 26 positions with cooling;
Reactor Rotor: 84 special glass optics with heating system;
Sample volume: 1.5 μL – 100 μL;
Reaction volume: 180 μL – 400 μL;
Temperatures at which thermostats of the reaction vessels can be made: OFF / 30 ° C / 32 ° C / 37 ° C +/- 0.2 ° C (Peltier system controlled).
photometer

13-channel „Solid state photometer” + 1 reference channel;
Wavelengths: 340, 380, 405, 436, 480, 510, 546, 578, 600, 660, 700, 740, 800 nm;
Absorbance range: 0.000 – 3.000 Abs;
Sensitivity: +/- 0.001 Abs;
Accuracy: +/- 1% from 0 to 2000 OD;
Tungsten halogen lamp with reflector;
Lamp lifetime – about 2000 hours.
Pipette arms / Dilator

1 x pipetting arm for samples;
2 x pipetting arms for reagents;
3 x long life ceramic dilators („Long life ceramic”);
Accuracy of diluents: +/- 0.1%;
Resolution of diluents: +/- 0.1μL for serum samples; +/- 1.0 μL for reagents.
Water consumption

9.5 ml / test
Interface

USB port;
Port RS232;
LAN port.
Electrical Requirements, Dimensions and Weight

100/240 VAC, 50 – 60 Hz, 400 Watt;
U.P.S .: 1500 Watt;
Net weight: 162 kg;
Gross weight: 237 kg;
Dimensions: 1150 x 1150 x 720 mm.
CE conformity marking; Quality standards: EN ISO 9001, EN ISO 13485.

The analyzer can be purchased without ISE or ISE mode.

The analyzer comes with an external computer and printer.

Warranty: 2 years from date of commissioning.